Working at height carries serious safety risks, so reliable fall protection is essential for construction, telecom, industrial, oil & gas, maintenance, and infrastructure workers. A full-body safety harness is one of the most important components of a fall protection system.
But what makes a safety harness effective? How do you choose the right harness? What features should you check before use? And how often should a harness be inspected?
This guide answers the most important questions about Full Body Safety Harnesses, their applications, features, inspection requirements, and how to select the right solution for your workplace.
What Is a Full Body Safety Harness?
A Full Body Safety Harness is personal protective equipment (PPE) designed to support and protect a worker during work at height and fall-arrest applications. It uses a combination of shoulder, chest, waist, and thigh straps to distribute forces across the body.
Unlike a simple belt, a full-body harness is designed to provide support around multiple areas of the body during a fall. The appropriate harness must always be selected according to the work application, compatible fall-protection equipment, manufacturer’s instructions, and applicable standards.
Explore Secure First Full Body Safety Harness solutions
Why Is a Full Body Safety Harness Important?
Why do workers need a full body harness when working at height?
A fall from height can result in severe injury or death. A properly selected and correctly worn full-body harness forms part of a personal fall protection system intended to help arrest a fall and keep the worker connected to the system.
A complete system may include:
- Full body safety harness
- Shock-absorbing lanyard
- Self-retracting lifeline (SRL)
- Anchorage or anchor point
- Connectors and hooks
- Rescue equipment where required
OSHA’s fall-protection requirements address personal fall arrest systems, including harnesses, connectors, anchorages, inspection and rescue provisions.
What Are the Main Features of a Full Body Safety Harness?
What should you look for when buying a safety harness?
The right harness depends on the application, but important features can include:
1. Strong Webbing:
High-quality webbing is important for durability and performance. Secure First states that its harnesses use high-tenacity polyester yarn designed for resistance to UV exposure and colour stability.
2. D-Rings and Attachment Points:
Depending on the design, harnesses may have dorsal, sternal, frontal, or side attachment points for specific applications.
3. Adjustable Straps:
Shoulder, chest and thigh adjustment helps achieve an appropriate fit.
4. Fall Indicator:
Some harnesses include a fall indicator that can help identify whether the harness has experienced a fall event.
5. Comfortable Design:
Features such as sit straps, padding, elastic loops and ergonomic adjustment can improve comfort during extended work.
6. Suitable Certification or Compliance:
The harness should be appropriate for the applicable safety requirements and intended application.
For example, Secure First’s SF-FBH-155-4D includes a dorsal D-ring for fall arrest, waist-level D-rings for positioning, a front D-ring for climbing, adjustable straps and a fall indicator, and states compliance with ANSI Z359.11-2021.
What Types of Full Body Safety Harnesses Are Available?
Which safety harness is best for different applications?
There is no single harness that is ideal for every work environment. The correct choice depends on the job.
Common types include:
- Fall Arrest Harness: Designed for applications where fall arrest is required.
- Work Positioning Harness: Used where workers need positioning support while performing tasks at height.
- Tower Climbing Harness: Designed for tower and climbing applications.
- Rescue Harness: Designed with features intended to support rescue operations.
- No-Spark Harness: Suitable for specific environments where controlling ignition risks is important.
- Flame-Resistant Harness: Designed for applications requiring specialized flame-resistant properties.
- Dielectric/Non-Conductive Harness: Designed for selected electrical or utility applications where non-conductive properties are required.
Secure First offers multiple harness categories, including No-Spark, Flame Resistant, Dielectric Non-Conductive, Edge Line, Eco Line, Comfort Line, Ultra Line, Flexi Line and Jacket Safety Harnesses.
How Do You Choose the Right Full Body Safety Harness?
What factors should you consider before purchasing a safety harness?
Before purchasing a harness, consider the following:
Application:
Is the worker performing construction, tower climbing, telecom, maintenance, roofing, rescue, or another activity?
Attachment Requirements:
Determine whether the task requires dorsal, sternal, frontal or positioning attachment points.
Fit and Adjustability:
A harness should be correctly fitted according to the manufacturer’s instructions.
Working Environment:
Consider exposure to heat, chemicals, sharp edges, electrical hazards, moisture, UV radiation or other workplace conditions.
Compatibility:
The harness must work correctly with the lanyard, SRL, anchorage and other components in the fall protection system.
Standards and Certification:
Check the applicable standard and manufacturer’s documentation rather than selecting a product based only on price.
ANSI/ASSP Z359.11-2021 covers requirements relating to the performance, design, marking, qualification, instruction, training, testing, inspection, use, maintenance and removal from service of full-body harnesses.
How Should You Inspect a Full Body Safety Harness?
What should you check before wearing a safety harness?
A harness should be inspected before use according to the manufacturer’s instructions and applicable workplace procedures.
Secure First recommends checking:
- Webbing for cuts, burns or damage.
- Stitching for continuity.
- Metal components for corrosion.
- Attachment points and hardware.
- The fall indicator where provided.
- Overall condition of the harness.
Secure First specifically recommends holding the harness by the back D-ring and allowing the straps to fall into position before beginning the inspection.
OSHA also requires personal fall arrest systems to be inspected before each use for wear, damage and deterioration, with defective components removed from service.
What happens if a harness has been involved in a fall?
A harness or fall-arrest system that has experienced impact loading should not simply be returned to service. OSHA states that personal fall arrest systems and components subjected to impact loading must be immediately removed from service until inspected and determined by a competent person to be undamaged and suitable for reuse.
Always follow the manufacturer’s instructions and your organization’s inspection and replacement procedures.
How Does a Full Body Safety Harness Work With an Anchorage?
Is a harness enough to protect a worker from a fall?
No. A harness is only one part of a complete fall protection system.
A typical system may connect:
Worker → Full Body Harness → Lanyard/SRL → Anchorage → Supporting Structure
The anchorage is particularly important because it provides the structural connection for the fall protection system.
Learn more about Fall Protection Anchorages
A properly selected anchorage should be compatible with the complete system and installed according to the applicable requirements and manufacturer’s instructions. Secure First’s anchorage guidance explains how harnesses, lanyards, SRLs, lifelines and energy-absorbing components work together as part of an anchorage system.
What Standards Apply to Full Body Safety Harnesses?
Is ANSI Z359.11 important for full-body harnesses?
ANSI/ASSP Z359.11-2021 is specifically titled Safety Requirements for Full Body Harnesses. It covers full-body harness performance, design, marking, qualification, training, inspection, use, maintenance and removal from service.
For international and project-specific applications, other standards may also apply. Therefore, organizations should identify the standards required for their particular workplace, industry and geographic market.
Read the ANSI/ASSP Z359.11-2021 standard information
For U.S. construction applications, OSHA’s fall-protection requirements provide additional requirements for personal fall arrest systems, including anchorage, connectors, inspection and rescue.
View OSHA Fall Protection System Requirements
How Is Secure First Different When Choosing a Safety Harness?
Why choose Secure First for full-body fall protection equipment?
Secure First provides a range of fall protection products designed for different working-at-height applications. Its harness range includes products with different attachment configurations, adjustment systems, materials and specialized features.
For example, the SF-FBH-155-1G features a high-tenacity polyester construction, dorsal D-ring, adjustable chest and leg straps, additional back support and a fall indicator, with stated compliance with ANSI Z359.11-2021.
The company also offers specialized solutions such as a No-Spark Antistatic Full Body Harness with stainless-steel buckles and features associated with EN 361 and antistatic requirements.
The right product should always be selected according to the specific application, required attachment configuration, environment, worker requirements and applicable safety standards.
Frequently Asked Questions About Full Body Safety Harnesses
1. What is a Full Body Safety Harness?
A Full Body Safety Harness is PPE designed to support a worker as part of a fall protection system. It distributes forces through multiple areas of the body and provides designated attachment points for compatible fall protection equipment.
2. Can a safety harness prevent every fall?
No. A harness is part of a fall protection system; it does not eliminate the possibility of a fall by itself. Proper anchorage, compatible connecting equipment, training, inspection and correct use are essential.
3. How often should a full body harness be inspected?
The harness should be inspected before each use and according to the manufacturer’s inspection requirements and workplace procedures. Any damaged or defective component should be removed from service.
4. What should I check before buying a safety harness?
Check the intended application, attachment points, adjustability, material, comfort, compatibility with other fall protection equipment, applicable standards and manufacturer documentation.
5. Which harness is suitable for tower climbing?
A harness specifically designed and approved for tower-climbing applications should be selected. The attachment configuration and connecting equipment should match the climbing system and manufacturer’s requirements.
6. Where can I buy a Full Body Safety Harness?
Businesses can explore Secure First’s range of full-body safety harnesses and select a solution based on their work-at-height requirements.
Explore Full Body Safety Harnesses from Secure First
Conclusion
Choosing the right Full Body Safety Harness is an important part of creating a safer work-at-height environment. The best harness is not necessarily the most expensive one; it is the one correctly matched to the application, worker, environment and complete fall protection system.
Before purchasing, evaluate the harness’s attachment points, adjustability, materials, inspection features, compatibility and applicable safety requirements. Workers should also receive appropriate training and inspect their equipment before use.
With the right Full Body Safety Harness, compatible lanyards or SRLs, reliable anchorages and proper workplace procedures, organizations can build a more comprehensive approach to fall protection.
Looking for a Full Body Safety Harness for your workplace? Explore Secure First’s fall protection solutions and choose equipment based on your specific application and safety requirements.